70mai Portable Car Jump Starter PS01เครื่องชาร์จแบตเตอรี่รถยนต์ จั้มสตาร์ทรถยนต์ แบตเตอรี่ เครื่องชาร์จรถยนต์แบบพกพา

How to use 70mai Jump Starter using the machine as a 12V device

1. Initial connection to the device. Make sure the indicator light on the battery clip is off.

2. Connect the battery clip correctly to the positive and negative terminals of the car battery. The red clip should be connected to the positive (+) end while the black clip should be connected to the negative (-) end, then follow the instructions below:

When the green light is on Shows that the connection is correct and the battery can be started.

When the red light is on and a buzzer is heard Indicates that the clip is connected to the wrong end. Connect the clips correctly and make sure the green light is on before starting the battery.

When the green light flashes and a buzzer is heard indicates that the voltage is too low. Press the boost button and wait until the green light stops flashing. Jump start the battery in 30 seconds.

When the green and red lights are not turned on and the buzzer is not heard. Indicates that the battery may be damaged. Make sure the clip is connected to the correct end. Press the add button and wait until the green light comes on. Jump start the battery in 30 seconds.

3. After the car, remove the battery clip.

independent power switch You can switch to strobe and SOS signal with a single switch.

in fully charged state You can use the highlight light continuously for 48 hours, allowing you to handle emergency situations freely when installing the car.

Make the anti-reverse interface design can automatically recognize when the battery clip is reversed to avoid misoperation.

Overall easy to use suitable for beginners Connect the portable starter, start the car, remove the starter jumper and go. Don’t wait for others to take care of yourself and leave.

It’s basically the size of a portable power bank for a smartphone.

Mobile phones have 4% battery power when you need them most. A good reason to use a power supply in your car is that most have USB ports that you can use to charge your phone. You can also use it to charge tablets and other things that charge via USB cable.

Basic parameters
Size: 163 × 87 × 27 mm.
Capacity: 11100mAh (41.07Wh)
Output: 5V/2.4A，12V
Input: 5V/2A
Charging time: ≤5.5 hours
Jump start current: 250A
Maximum current: 600A
Working temperature: -20℃~55℃
Charging temperature: 0~55℃

packing list
70MAI jump starter × 1
Charging cable × 1
Smart battery clip × 1
Storage bag × 1
User manual × 1